Lork Manufacturing ASTM A276/ASTM A479/Uns S32750 Duplex Steel Tube for Marine Industry and Shipbuilding F53 Stainless Steel Pipe

• Customization: Available
• After-sales Service: Communicate with Us
• Warranty: Communicate with Us
• Type: Seamless
• Technique: Cold Rolled
• Material: Stainless Steel
• Usage: Pipeline Transport, Boiler Pipe, Hydraulic/Automobile Pipe, Oil/Gas Drilling, Food/Beverage/Dairy Products, Machinery Industry, Chemical Industry, Mining, Construction & Decoration, Special Purpose
• Section Shape: Round
• Key Words: F53 Steel Pipe/Tube
• Diameter: 3mm - 100mm
• Outer Diameter: 1000mm-3000mm
• Length: as Your Requirments
• Diameter Tolerance: H9, H11, H13, K9, K11, K13 etc
• Sample: Free-Sample
• Surface: Lack, Peeled, Polishing, Bright, Sand Blast, Hl
• MOQ: 100kgs
• Transport Package: Wooden Package
• Specification: F53
• Trademark: LORK
• Origin: China
• HS Code: 7219350000
• Production Capacity: 50000kg/Month

Product Description

Product Description

 

Introduction
 

F51 duplex steel has excellent corrosion resistance, increased resistance to chloride attack and good resistance to stress corrosion cracking. F51 tensile and yield strength is higher than conventional austenitic or ferritic grades of stainless steel. It has good weldability and good formability.

Duplex steels contain both ferritic and austenitic microstructures. They have a high chromium content and a moderate nickel content. They also caontain Molybdenum. F51 material is too low in nickel to produce a fully austenitic structure, thus producing the duplex microstructure (ferrite and austenite). The main advantage of duplex F51 / 1.4462 / UNS 31803 stainless steel is the combination of properties given by both the austenitic and ferritic structure (austeno-ferritic).

 

Duplex Stainless F51 Applications

• Process industry components in sulphuric acid, phosphoric acid, ethylene oxide, polypropylene & PVC production
• Equipment handling organic & fatty acids, chemical storage, tankers, heat exchangers
• Marine industry and shipbuilding propellers, shafts, rudders, shaft seals, pumps, bolts, fasteners, valves, instrumentation
• Oil and chemical tankers
• Oil & Gas industry pumps, valves, pipe, vessels, wellhead equipment, subsea equipment, separators, heat exchangers
• Pollution control systems, effluent scrubbing, flue gas desulphurisation (FGD)
• Waste water treatment, sour water purification
• Pulp & paper industry applications such as pulp liquor heaters, bleach tower linings, digesters, brownstock washers
• Food industry applications including brewery piping, evaporators, hot liquor tanks, presses

Standards
▪ ASTM A182 F51 / F60
▪ ASTM A276 F51 / F60
▪ ASTM A479 F51
▪ AISI F51
▪ BS 318S13 (Wrought)
▪ BS 332C15 (Cast)
▪ WS 1.4462
▪ WS 1.4470
▪ X2CrNiMoN22.5.3
▪ AFNOR Z2CND22.05Az
▪ UNS S31803
▪ UNS S32205
▪ SAF2205 - SANMAC (Brand name)
▪ URANUS 45N (Brand name)
▪ FALC223 (Brand name)

Duplex Stainless F51 Chemical Composition

Weight%	C	Mn	P	S	Si	Cr	Ni	Mo	N
Duplex F51	0.03 max	2.0 max	0.03 max	0.02 max	1 max	21-23	4.5-6.5	2.5-3.5	0.80-0.20

Duplex Stainless F51 Mechanical Properties

 

Alloy	Tensile Strength N/mm²	Proof Strength 0.2% N/mm²	Elongation (%)	Hardness Brinell
F51	105	55	35	170-255
F51	95	50	35	170-255

Available Sizes And Specifications

F51 stainless steel pipe sizes and specifications
Grade	F51
Cold rolled stainless steel plate	Thickness: 0.3mm- 16.0mm, Width: 1000mm - 2000mm, Length: as requirements, Surface: 2B/BA/SB/8K/HL/1D/2D etc
Hot rolled stainless steel sheet	Thickness: 3.0mm - 300mm, Width: 1000mm - 3000mm Length: as requirements, Surface: No.1/pickling
Standard	ASTM A240/A480, ASTM B688, ASTM B463/SB463, ASTM B168/SB168, ASTM B443/SB443/B424/SB424B625/SB625 B575/SB575, JIS G4303, BS 1449, DN17441, G4305
Stainless steel plate	Thickness: 8.0mm - 300mm, Width: 1000mm - 3000mm Length: as requirements, Surface: No.1/pickling
Standard	ASTM A240/A480, ASTM B688, ASTM B463/SB463, ASTM B168/SB168, ASTM B443/SB443/B424/SB424B625/SB625 B575/SB575, JIS G4303, BS 1449, DN17441, G4305

Surface Treatment

 

Detection

Processing

 

Packaging & Shipping

Company Profile

FAQ

Q1: Do you accept the trial order ?
A1: Yes,if we have the exactly size in stock.we can delivery even 1 piece/meter .

Q2: Can I have free sample before making orders?

A2: Yes,we can supply free sample as requirement,but buyer needs to pay the freight charges ,the freight fee will return to buyer after making order.

Q3: How do you control the quality ?
A3: MTC and PMI will be sent before shipment,any 3rd party inspection if need .

Q4: How about your delivery time ?
A4: Generally delivery time is 15 working days .

Q5: How can I quickly get the price list ?
A5: Directly click "chat now" or send us email with detail specifications,you will get the official price list in 1 hour .