Lork Vacuum Induction Furnace Smelting Ni80mo5 Permalloy Tube for Magnetic Modulator 1j85 Precision Alloy Pipe

• Customization: Available
• Product Type: Tube/Pipe
• Material: Precision Soft Magnetic Alloy
• PCD: 100mm
• ET: 15mm
• Hole: 6
• Key Words: 1j85 Pipe/Tube
• Thickness: 3.0mm - 150mm
• Outer Diameter: 6mm - 1219mm
• Length: as Your Requirments
• Diameter Tolerance: H9, H11, H13, K9, K11, K13 etc
• Sample: Free-Sample
• Surface: Lack, Peeled, Polishing, Bright, Sand Blast, Hl
• MOQ: 100kgs
• Stock: in Stock
• Transport Package: Wooden Package
• Specification: 1j85 pipe/tube
• Trademark: LORK
• Origin: China
• HS Code: 7219350000
• Production Capacity: 50000kg/Month

Product Description

Product Description

 

Introduction

LORK is a alloy manufacturer with 20 years of manufacturing experience.
 

1J85 alloy is smelted in a vacuum induction furnace. After being cast into a steel ingot, it is hot forged into a slab, then after hot rolling, pickling, and surface finishing, it is cold rolled into a finished strip or forged into the required bar. Most of these alloys are said to be used under alternating magnetic fields. They are mainly used for high-conductivity yoke irons, sensitive relays, low-loss micromotors, low-power power transformers, pulse transformers, transistor switches, magnetic amplifiers, magnetic modulators, and sensitive signals. Input and output transformers, magnetic sensors of aviation magnetic heading instruments, magnetic sensitive components in magnetic measuring instruments, moving and stators in precision electric meters, magnetic shielding and magnetic temperature compensation components.

Precision Soft Magnetic Alloy 1J85 Applications
 

1J50 magnetic alloy, a Ni-Fe soft magnetic alloy, mainly applies to high magnetic conductivity yoke iron, sensitive relay, low loss micromotor, low power transformer, pulse transformer, transistor switch, magnetic amplifier, magnetic modulator, sensitive signal input and output transformer, magnetic sensor of aviation magnetic heading instrument, magnetic sensitive element of magnetic measuring instrument, stator and movable plate of precision electric meter, magnetic shielding and magnetic temperature compensating elements.

  Precision Alloy 1J85 Chemical Composition
 

Grade	Chemical Composition (%)
	Fe	Ni	Mo	Si	Mn	Cu	C	S	P
Ni80Mo5	Bal	79.0~81.0	4.8~5.2	0.15~0.3	0.3~0.6	<=0.2	<=0.03	<=0.02	<=0.02

 

Precision 1J85 Mechanical Performance
 

Yield strength	Tensile Strength	Elongation
Mpa	Mpa	%
980	1030	3~50

 

1J85 Physical Properties

Density	Resistivity at 20ºC	Coefficient of linear expansion 20ºC~200ºC	Saturation magnetostriction coefficient	Curie point
(g/cm3)	(Ωmm2/m)	X10-6/ºC	λθ/ 10-6	Tc/ ºC
8.75	0.56	10.9~11.2	0.5	400

 

1J85 Magnetic Properties
 

Ni80Mo5/1J85	Initial permeability	Maximum permeability	Coercivity	Saturation magnetic induction
Cold rolled strip or plate Thickness, mm	μ0.08/ (mH/m)	μm/ (mH/m)	Hc/ (A/m)	BS/ T
	≥		≤
0.01 mm	20	87.5	4.8	0.75
0.1~0.19 mm	37.5	187.5	1.6
0.2~0.34 mm	50	225	1.2
0.35~1.0 mm	62.5	312.5	0.8
1.1~2.5 mm	50	187.5	1.2
2.6~3.0 mm	43.8	150	1.44
Cold drawn wire
0.1 mm	8.7	37.6	6.4
Bar
8-100 mm	37.5	125	1.6

 

1J85 Heat Treatment Process
 

Annealing medium	Dry hydrogen (the dew point is not higher than -40ºC) or vacuum, the residual pressure is not more than 0.1Pa
Heating temperature and speed	1100~1200ºC
Holding time/h	3~6
Cooling rate	Cool to 600°C at a rate of 100 ~ 200 ºC/h, then cool to 300°C at a rate of not less than 400°C/h

  1J85 Supply Form And Specification
 

Alloy grade	Form	Size
Ni80Mo5	Wire	D= 0.1~8mm
Ni80Mo5	Strip	W= 8~390mm	T= 0.3mm
Ni80Mo5	Foil	W= 10~100mm	T= 0.01~0.1mm
Ni80Mo5	Bar	Dia= 8~100mm	L= 50~1000mm

 

Detection

Processing

 

Packaging & Shipping

Company Profile

FAQ

Q1: Do you accept the trial order ?
A1: Yes,if we have the exactly size in stock.we can delivery even 1 piece/meter .

Q2: Can I have free sample before making orders?

A2: Yes,we can supply free sample as requirement,but buyer needs to pay the freight charges ,the freight fee will return to buyer after making order.

Q3: How do you control the quality ?
A3: MTC and PMI will be sent before shipment,any 3rd party inspection if need .

Q4: How about your delivery time ?
A4: Generally delivery time is 15 working days .

Q5: How can I quickly get the price list ?
A5: Directly click "chat now" or send us email with detail specifications,you will get the official price list in 1 hour .