Lork Hot New Product S32654/1.4652 Steel Alloy Steel for Oil and Gas Equipment 654 Smo Stainless Steel Coil

• Customization: Available
• Type: Stainless Steel Coils
• Standard: ASTM, AISI, GB, JIS, DIN, EN
• Model NO.: 654 SMO coil
• Grade: Super Stainless
• Certification: ISO, AISI, ASTM, GB
• Shape: Square
• Technique: Cold Rolled
• Surface Treatment: Pickling
• Key Words: 654 Smo Coil
• Width: 1000mm - 2000mm
• Thickness: 0.3mm- 3.0mm
• Length: as Your Requirments
• Diameter Tolerance: H9, H11, H13, K9, K11, K13 etc
• Sample: Free-Sample
• Surface: Lack, Peeled, Polishing, Bright, Sand Blast, Hl
• MOQ: 100kgs
• Stock: in Stock
• Transport Package: Wooden Package
• Specification: 654 SMO
• Trademark: LORK
• Origin: China
• HS Code: 7219350000
• Production Capacity: 50000kg/Month

Product Description

Product Description

 

Introduction

015Cr24Ni22Mo8Mn3CuN, 00Cr24Ni22Mo7Mn3CuN, 654 SMO stainless steel is a 7Mo type super austenitic stainless steel developed on the basis of (00Cr20Ni18Mo6CuN) 254SMO stainless steel with increased chromium, nickel and molybdenum content. The PRE value (pitting corrosion resistance equivalent value) of 654SMO stainless steel is as high as 55. The nitrogen content in the steel can reach about 0.5%, which is almost the highest solid solution nitrogen content of high chromium (about 24%) and low manganese (about 3%) stainless steel under normal pressure. 654SMO stainless steel has excellent resistance to various types of corrosion.

It can replace iron-nickel-based and even nickel-based corrosion-resistant alloys in many media, thus filling the gap between stainless steel and high nickel corrosion-resistant alloys in the absence of high pitting corrosion resistance and high crevice corrosion resistance stainless steel.

Super Stainless 654SMO Applications

015Cr24Ni22Mo8Mn3CuN, 00Cr24Ni22Mo7Mn3CuN, 654 SMO stainless steel has high strength and excellent plasticity and toughness. In many highly corrosive media, the overall corrosion resistance and local corrosion resistance of this steel are not only better than the existing 6%Mo type super austenitic stainless steel and super duplex stainless steel, but also the local corrosion resistance of this steel is often close to or better than some well-known high chromium, molybdenum nickel-based corrosion-resistant alloys. Widely used in

▪ Paper industry
▪ Flue gas desulfurization (FGD) flue gas purification environmental components
▪ Chemical equipment
▪ Marine engineering
▪ Oil and gas
▪ Heat exchangers


Super Stainless 654SMO Chemical Composition
 

Element	Content (%)
Ni (Nickel)	22.00
Cr (Chromium)	24.00
Mo (Molybdenum)	7.30
Fe (Iron)	Bal.
Si (Silicon)	0.50
Mn (Manganese)	1.00
C (Carbon)	0.010
Cu (Copper)	0.37
P (Phosphorus)	0.020
S (Sulphur)	0.015

Super Stainless 2304 Mechanical Properties

 

Mechanical properties of (00Cr24Ni22Mo7Mn3CuN) 654SMO stainless steel
Brand	Mechanical properties
	σb/MPa	σ0.2/MPa	d/%	Impact energy/J
				20ºC	-196ºC
(00Cr24Ni22Mo7Mn3CuN) 654SMO stainless steel	≥750	≥410	≥40	250	125
(00Cr20Ni18Mo6CuN) 254SMO stainless steel	≥650	≥310	≥35	-	-
(00Cr17Ni12Mo2) 316L stainless steel	≥490	≥170	≥45	-	-
(0Cr22Ni60Mo9Nb4) Inconel625 alloy	≥830	≥415	≥35	-	-
(00Cr16Ni60Mo16W4) Hastelloy C-276 alloy	≥750	≥310	≥30	-	-

654SMO / S32654 stainless steel has excellent plasticity and toughness in solid solution state and higher strength than ordinary austenitic and 6% Mo austenitic stainless steel. Its mechanical properties are even comparable to some nickel-based corrosion-resistant alloys.

Corrosion resistance

 General corrosion  


    The corrosion resistance of 654SMO stainless steel is not only better than 304 , 316 , and 904L , but also better than 254SMO in HCl and HF acid.


Pitting and crevice corrosion


  The pitting and crevice corrosion resistance of 654SMO stainless steel is not only better than that of 6% Mo type super austenitic stainless steel and (022Cr25Ni7Mo4N) 2507 super duplex stainless steel, but also better than the tested corrosion-resistant alloys such as Inconel 625 and Hastelloy C-276 .


Stress corrosion


   The stress corrosion test was carried out by droplet evaporation method. From the results obtained, it can be seen that under the conditions of the test, when the applied stress reaches σ0.2, 654 SMO stainless steel is likely to produce stress corrosion cracking. Other grades report that the stress corrosion resistance of 254 SMO stainless steel and 2507 super duplex stainless steel is lower than that of S32654 stainless steel, and some grades (316 2205 ) are still far lower than 00Cr24Ni22Mo7Mn3CuN.


 Corrosion resistance in actual media


  In the pulp bleaching process of paper mills, there is a very harsh corrosive environment using the "C" section of chlorine and the "D" section of carbon dioxide and the combination of the two as bleaching chemicals. The results obtained from the corrosion test simulating the medium conditions of the "C" section show that the corrosion resistance of 654 SMO stainless steel is significantly better than that of 254 SMO and nickel-based corrosion-resistant alloys Inconel 625 and Hastelloy C-276.


 Hot and cold processing performance


   654SMO stainless steel is one of the grades with the highest alloying element content among super austenitic stainless steels. Due to the high content of chromium, molybdenum and nitrogen in the steel, the thermoplasticity of this steel is low, and the high temperature strength is high, so the hot working performance is relatively poor, and hot cracks, especially edge cracks, are prone to occur. The cold working and cold forming of this steel are better than this steel. It is easy to harden by cold working, so the primary cold deformation should not be too large, preferably ≤15%.


 Welding performance


   S32654 super stainless steel has good welding performance and can be welded using the welding methods used for austenitic stainless steel. When manual arc welding, it is recommended to use P16 welding rod (P16 contains 24% chromium, 60% nickel, and 15% molybdenum).


Heat treatment process


   The suitable heat treatment process for 015Cr24Ni22Mo8Mn3CuN, 00Cr24Ni22Mo7Mn3CuN and 654 SMO stainless steel is heating and insulation at ≥1150ºC followed by rapid cooling.

Available Sizes And Specifications

 

653smo stainless steel plate sizes and specifications
Grade	654smo
Stainless steel seamless pipe	Outside diameter: 4.0 - 1219mm, Thickness: 0.5 -100mm,Length: 24000mm
Stainless steel welded pipe	Outside diameter: 6.0 - 2800mm, Thickness: 0.3 -45mm,Length: 18000mm
Stainless steel capillary pipe	Outside diameter: 0.4 - 16.0mm, Thickness: 0.1 -2.0mm,Length: 18000mm
Stainless steel welded sanitary pipe	Outside diameter:8.0- 850mm, Thickness: 1.0 -6.0mm
Stainless steel seamless sanitary pipe	Outside diameter: 6.0- 219mm, Thickness: 1.0 -6.0mm
Stainless steel square pipe	Side Length: 4*4 - 300*300mm, Thickness: 0.25 - 8.0mm, Length: 18000mm
Stainless steel rectangular pipe	Side Length: 4*6 - 200*400mm, Thickness: 0.25 - 8.0mm, Length: 18000mm
Stainless steel coil pipe	Outside diameter: 0.4 - 16mm, Thickness: 0.1 - 2.11mm
Standard	American Standard: ASTM A312, ASME SA269, ASTM A269, ASME SA213, ASTM A213 ASTM A511 ASTM A789, ASTM A790, ASTM A376, ASME SA335, B161, SB163, SB338, SB667/668 Germany Standard: DIN2462.1-1981, DIN17456-85, DIN17458-85· European Standard: EN10216-5, EN10216-2 Japanese Standard: JIS G3463-2006, JISG3459-2012 Russian Standard: GOST 9941-81

 

Surface Treatment

 

Detection

Processing

 

Packaging & Shipping

Company Profile

FAQ

Q1: Do you accept the trial order ?
A1: Yes,if we have the exactly size in stock.we can delivery even 1 piece/meter .

Q2: Can I have free sample before making orders?

A2: Yes,we can supply free sample as requirement,but buyer needs to pay the freight charges ,the freight fee will return to buyer after making order.

Q3: How do you control the quality ?
A3: MTC and PMI will be sent before shipment,any 3rd party inspection if need .

Q4: How about your delivery time ?
A4: Generally delivery time is 15 working days .

Q5: How can I quickly get the price list ?
A5: Directly click "chat now" or send us email with detail specifications,you will get the official price list in 1 hour .