Lork High Quality Age Hardening Treatment AMS 5544/ASTM B435/N10242 Super Alloy Plate for Aircraft Engine Parts Haynes 244 Alloy Sheet

• Customization: Available
• Product Type: Sheet
• Material: Nife
• Model NO.: Haynes 244 sheet/plate
• Carbon Content: Low Carbon
• PCD: 112mm
• ET: 42mm
• Hole: 5
• Key Words: Haynes 244 Sheet/Plate
• Thickness: 3mm - 150.0mm
• Width: 1000mm - 3000mm
• Length: as Your Requirments
• Surface: Black, Bright, Polished, Pickling
• MOQ: 100kgs
• Sample: Free-Sample
• Technique: Cold Rolled, Hot Rolled
• Condition: Annealed;Heat Treatment
• Stock: in Stock
• Transport Package: Wooden Package
• Specification: haynes 244
• Trademark: LORK
• Origin: China
• HS Code: 7505120000
• Production Capacity: 50000kg/Month

Product Description

Product Description

 

Introduction

LORK is a super alloy manufacturer with 20 years of manufacturing experience.
 

HAYNES 244 alloy is a new Ni-Mo-Cr-W alloy developed for static parts in advanced gas turbine engines which require low thermal expansion at temperatures up to 1400°F (760°C). It offers a higher maximum use temperature than other low thermal expansion alloys currently available, including a 100-200°F (55-110°C) improvement over HAYNES 242 alloy. The alloy is age-hardenable by formation of Ni2 (Cr,Mo,W) domains, which are structurally similar to the strengthening domains in 242 alloy. Judicious alloying with tungsten increased the thermal stability of these domains and lowered the coefficient of thermal expansion. Other important properties such as oxidation resistance and low-cycle fatigue performance are comparable or better than those of 242 alloy.

 Haynes 244 Application
HAYNES 242 alloy combines properties which make it ideally suited for a variety of component applications in aero and industrial gas turbine engines. It may be used for seal rings, containment rings, duct segments, casings, fasteners, rocket nozzles, pumps, and many others. In the chemical process industry, 242 alloy will find use in high-temperature vapor-containing processes as a consequence of its excellent resistance to that environment. The alloy also displays excellent resistance to high-temperature fluoride salt mixtures. The high strength and fluorine environment-resistance of 242 alloy has also been shown to provide for excellent service in fluoroelastomer process equipment, such as extrusion screws.

Heat Treatment

 

HAYNES 244 alloy is furnished in the annealed condition, unless otherwise specified. The alloy is usually annealed in the range of 2000-2100°F (1093-1149°C), depending upon specific requirements, followed by an air cool (or more rapid cooling) before aging. A water quench is recommended for heavy section components. Aging is performed by holding at 1400°F (760°C) for 16 hours, furnace cooling to 1200°F (649°C) and holding for 32 hours, followed by air cool.

Haynes 244 Chemical Composition

 

Nickel	Balance
Aluminum	0.5 max.
Carbon	0.03 max.
Chromium	8
Iron	2 max.
Manganese	0.8 max.
Molybdenum	22.5
Tungsten	6

Haynes 244 Mechanical Properties

 

Test Temperature		Yield Strength, 0.2% Offset		Ultimate Tensile Strength		Elongation	Reduction of Area
°F	°C	ksi	MPa	ksi	MPa	%	%
RT	RT	121.2	836	195.0	1345	34	37
200	93	116.3	802	190.3	1312	39	41
400	204	110.3	761	181.6	1252	39	45
600	316	107.9	744	175.4	1209	41	44
800	427	100.0	689	170.4	1175	41	46
1000	538	99.3	685	164.2	1132	38	43
1100	593	97.5	672	156.3	1078	32	32
1200	649	93.8	647	141.4	975	21	24
1300	704	84.8	585	125.6	866	18	20
1400	760	67.2	463	105.0	696	44	37
1500	816	37.1	256	72.0	463	106	70
1600	871	34.8	240	54.1	354	124	84
1700	927	38.2*	263*	42.4*	208*	161*	89*
1800	983	24.0	165	30.4	210	141	94

Available Sizes And Specifications

Haynes 244 available sizes and specifications
Grade	Haynes 244
Nickel plate	Thickness: 0.3mm - 150.0mmWidth: 1000mm - 3000mm
Nickel strip/ nickel foil	Thickness: 0.02mm - 16.0mm Width: 5mm - 3000mm
Nickel coil	Thickness: 0.3mm - 16.0mm Width: 1000mm - 3000mm
Nickel pipe	Outside diameter: 6mm - 1219mm Thickness: 0.5mm - 100mm
Nickel Capillary Pipe	Outside diameter: 0.5mm - 6.0mm Thickness: 0.05mm - 2.0mm
Nickel bar	Diameter: Ф4mm - Ф600mm
Nickel wire rod	Diameter:Ф0.01mm - Ф6mm

Detection

Processing

 

Packaging & Shipping

Company Profile

FAQ

Q1: Do you accept the trial order ?
A1: Yes,if we have the exactly size in stock.we can delivery even 1 piece/meter .

Q2: Can I have free sample before making orders?

A2: Yes,we can supply free sample as requirement,but buyer needs to pay the freight charges ,the freight fee will return to buyer after making order.

Q3: How do you control the quality ?
A3: MTC and PMI will be sent before shipment,any 3rd party inspection if need .

Q4: How about your delivery time ?
A4: Generally delivery time is 15 working days .

Q5: How can I quickly get the price list ?
A5: Directly click "chat now" or send us email with detail specifications,you will get the official price list in 1 hour .