| Customization: | Available |
|---|---|
| Type: | Stainless Steel Bars |
| Standard: | ASTM, AISI, GB, JIS, DIN, EN |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
LORK is a special stainless steel manufacturer with 20 years of manufacturing experience.
S35000 stainless steel is a precipitation-hardening stainless steel formulated for primary forming into wrought products. S35000 is the UNS number for this material. Additionally, the common industry name is Alloy 360.
It can have a moderately high tensile strength among the wrought precipitation-hardening stainless steels in the database.
The properties of S35000 stainless steel include three common variations. This page shows summary ranges across all of them. For more specific values, follow the links immediately below. The graph bars on the material properties cards further below compare S35000 stainless steel to: wrought precipitation-hardening stainless steels (top), all iron alloys (middle), and the entire database (bottom). A full bar means this is the highest value in the relevant set. A half-full bar means it's 50% of the highest, and so on.
600 Series Stainless 633 Applications
S35000 is typically used in applications below 1000°F where a combination of strength and good corrosion resistance is required.
- Aerospace applications,
- Edge welded bellows applications,
- Precision seals,
- Couplings for semiconductor processing equipment,
- High vacuum systems,
- Industrial cutting machines,
- Cutting tools and various valves and gas turbine compressor components such as blades, disks, rotors and shafts
and similar parts requiring high strength at room and moderate temperatures.
Specification
- AM 350 (Type 633),
- AISI 350,
- Grade 350,
- SUS 633(JIS),
- ATI AM 350,
- CarTech 350 Alloy (Pyromet alloy 350)
- ASTM A693 / ASME SA693
- AMS 5548
- AMS 5745
- UNS35000
Chemical composition(mass fraction)(wt.%) of the A 693 Type 633
| Elements | Min.(≥) | Max.(≤) |
| C | 0.07 | 0.11 |
| Mn | 0.50 | 1.25 |
| Si | - | 0.50 |
| P | - | 0.04 |
| S | - | 0.03 |
| Cr | 16.00 | 17.00 |
| Ni | 4.00 | 5.00 |
| Mo | 2.50 | 3.25 |
| N | 0.07 | 0.13 |
| YieldRp0.2 (MPa) | TensileRm (MPa) | ImpactKV (J) | ElongationA (%) | Reduction in cross section on fractureZ (%) | As-Heat-Treated Condition | HBW |
| 263 (≥) | 746 (≥) | 12 | 14 | 12 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 324 |
| Properties | Conditions | ||
| T (°C) | Treatment | ||
| Density (×1000 kg/m3) | 7.7-8.03 | 25 | |
| Poisson's Ratio | 0.27-0.30 | 25 | |
| Elastic Modulus (GPa) | 190-210 | 25 | |
| Tensile Strength (Mpa) | 1105 | 25 | annealed more |
| Yield Strength (Mpa) | 415 | ||
| Elongation (%) | 30 | ||
| Reduction in Area (%) | |||
| Hardness (HRB) | 95 | 25 | annealed more |
| Product type | Products | Dimension | Processes | Deliver Status |
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| 633 Stainless steel profile sizes and specifications | |
| Grade | 633 |
| Specification | EN, DIN, JIS, ASTM, BS, ASME, AISI, ISO |
| Standard | AMS 5520,AMS 5657,ASTM A564 (632),ASTM A579 (632),ASTM A693 (632),ASTM A705 (632),DIN 1.4532,DIN 1.4574,MIL S-8955,AMS 5812, AMS 5813 |
| Stainless steel round Bar | Diameter: 2mm - 600mm |
| Stainless steel bright Bar | Diameter: 2mm - 600mm |
| Stainless steel hex Bar | Dimension: 6mm - 80mm |
| Stainless steel square bar | Dimension: 3.0 - 180mm |
| Stainless steel flat bar | Thickness: 0.5mm - 200mm, Width: 1.5mm - 250 mm |
| Stainless steel angle bar | as requirements |
| Length | Normally 6m, or produce as requirements |
| Surface | Black, Bright. Peeled and Polished, Solution annealed. |
| Delivery condition | cold drawn, hot rolled, forged, grinding, centerless grinding |
| Tolerance | H8, H9, H10, H11, H12, H13,K9, K10, K11, K12 or as per clients' requirements |
Q1: Do you accept the trial order ?
A1: Yes,if we have the exactly size in stock.we can delivery even 1 piece/meter .
Q2: Can I have free sample before making orders?
){kind=link}