| Customization: | Available |
|---|---|
| Product Type: | Coil |
| Material: | Nife |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
LORK is a super alloy manufacturer with 20 years of manufacturing experience.
HAYNES 263 alloy (UNS N07263) is an age-hardenable nickel-cobalt-chromium-molybdenum alloy developed specifically to combine good age-hardened strength properties with excellent fabrication characteristics in the annealed condition. HAYNES 263 alloy exhibits excellent intermediate temperature tensile ductility, and is not normally subject to strain age cracking problems common for gamma prime strengthened alloys. Its strength at elevated temperature is not quite as high as materials such as HAYNES 282 alloy, Waspaloy alloy, or R-41 alloy. However, it is much easier to form or weld than Waspaloy alloy and R-41 alloy. Because HAYNES 282 alloy exhibits superior tensile, creep-rupture, and low cycle fatigue strength than HAYNES 263 alloy and has significantly greater fabricability than Waspaloy and R-41 alloys, it is replacing HAYNES 263 alloy in many applications.
HAYNES 263 alloy is normally used for applications up to about 1650°F (900°C). Its oxidation resistance is comparable to that for other gamma-prime-strengthened superalloys.
Haynes 263 Plate Applications
▪ HAYNES C 263 is used in the following application areas:
▪ Gas turbine hot section components such as medium temperature combustors
▪ Aircraft turbine engine components
▪ Land-based turbine components
▪ Low temperature combustors
▪ Transition liners
#1 - Hot rolled annealed and descaled. It is available in strip, foil and ribbon. It is used for applications where a smooth decorative finish is not required.
#2D - Dull finish produced by cold rolling, annealing and descaling. Used for deep drawn parts and those parts that need to retain lubricants in the forming process. #2B - Smooth finish produced by cold rolling, annealing and descaling. A light cold rolling pass is added after anneal with polished rolls giving it a brighter finish than 2D.
#BA- Bright annealed cold rolled and bright annealed
#CBA- Course bright annealed cold rolled matte finish and bright anneal
#2 - Cold Rolled
#2BA- Smooth finish produced by cold rolling and bright annealing. A light pass using highly polished rolls produces a glossy finish. A 2BA finish may be used for lightly formed applications where a glossy finish is desired in the formed part. Polished - Various grit finish for specific polish finished requirements.
Cold Forming
Haynes® 263 has excellent forming characteristics. The alloy has excellent ductility in the annealed condition, and thus may also be formed by cold working. Intermediate annealing in the temperature range from 1900 to 2000 °F may be needed for complex component forming operations. All hot or cold-worked parts should be annealed and rapidly cooled in order to restore the best balance of properties.
| Element | Content (%) |
| Nickel, Ni | 52 |
| Chromium, Cr | 20 |
| Cobalt, Co | 20 |
| Molybdenum, Mo | 6 |
| Titanium, Ti | 2.4 |
| Iron, Fe | 0.7 |
| Aluminum, Al | 0.6 |
| Manganese, Mn | 0.6 |
| Silicon, Si | 0.4 |
| Copper, Cu | 0.2 |
| Carbon, C | 0.06 |
| Properties | Metric | Imperial |
| Tensile strength | 1050 MPa | 152.3 ksi |
| Yield strength | 635 MPa | 91.9 ksi |
| Elastic modulus | 221 GPa | 32.1 psi |
| Elongation at break | 35.70% | 35.70% |
| Haynes 263 available sizes and specifications | |
| Grade | Haynes 263 |
| Nickel plate | Thickness: 0.3mm - 150.0mm Width: 1000mm - 3000mm |
| Nickel strip/ nickel foil | Thickness: 0.02mm - 16.0mm Width: 5mm - 3000mm |
| Nickel coil | Thickness: 0.3mm - 16.0mm Width: 1000mm - 3000mm |
| Nickel pipe | Outside diameter: 6mm - 1219mm Thickness: 0.5mm - 100mm |
| Nickel Capillary Pipe | Outside diameter: 0.5mm - 6.0mm Thickness: 0.05mm - 2.0mm |
| Nickel bar | Diameter: Ф4mm - Ф600mm |
| Nickel wire rod | Diameter:Ф0.01mm - Ф6mm |
Q1: Do you accept the trial order ?
A1: Yes,if we have the exactly size in stock.we can delivery even 1 piece/meter .
Q2: Can I have free sample before making orders?
){kind=link}