| Customization: | Available |
|---|---|
| Type: | Titanium Pipes |
| Application: | Industrial, Medical |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Lork Group specializes in the supply of Grade 23 Ti 6Al 4V ELI alloy raw materials and processing, alloys, stainless steel, metal quality development, welcome your inquiries
Titanium alloy has become an ideal manufacturing material for aircraft and engines due to its high strength,
good mechanical properties and corrosion resistance, but its poor machinability has long restricted its application to a large extent.
With the development of processing technology, titanium alloy has been widely used in the manufacture of parts such as the compressor section, engine cowl, exhaust device of aircraft engines and the manufacture of structural frame parts such as the beam spacer of aircraft.
TC4 titanium alloy has excellent corrosion resistance, small density, high specific strength and
better toughness and weldability and a series of advantages.and other sectors have been successfully applied.
Titanium alloys are divided into three main groups: alpha-phase, beta-phase, and alpha-beta-phase. Grade 23 Ti 6Al 4V ELI alloy is an alpha-beta wrought alloy. The ELI stands for extra low interstitial. For an alloy to be branded as an ELI product, it should be produced as such at the mill.
Titanium Grade 23 Ti 6Al 4V ELI Alloy Application Industries
Grade 23 Ti 6Al 4V ELI Titanium Alloy Chemical Composition
The chemical composition of grade 23 Ti 6Al 4V ELI alloy is outlined in the following table.
| Element | Content (%) |
| Titanium, Ti | 88.09 - 91 |
| Aluminum, Al | 5.5 - 6.5 |
| Vanadium, V | 3.5 - 4.5 |
| Iron, Fe | ≤ 0.25 |
| Carbon, C | ≤ 0.080 |
| Nitrogen, N | ≤ 0.030 |
| Hydrogen, H | ≤ 0.0125 |
| Other, each | ≤ 0.10 |
| Other, total | ≤ 0.40 |
| Properties | Metric | Imperial |
| Tensile strength | 860 MPa | 125000 psi |
| Yield strength | 790 MPa | 115000 psi |
| Poisson's ratio | 0.342 | 0.342 |
| Elastic modulus | 113.8 GPa | 16510 ksi |
| Shear modulus | 44.0 GPa | 6380 ksi |
| Elongation at break | 15% | 15% |
| Hardness, Brinell | 326 | 326 |
| Hardness, Knoop | 354 | 354 |
| Hardness, Rockwell C | 35 | 35 |
| Hardness, Vickers | 341 | 341 |
The physical properties of grade 23 Ti 6Al 4V ELI alloy are tabulated below.
| Properties | Metric | Imperial |
| Density | 4.43 g/cm3 | 0.160 lb/in3 |
| Melting point | 1604 - 1660°C | 2919 - 3020°F |
The thermal properties of grade 23 Ti 6Al 4V ELI alloy are tabulated below.
| Properties | Metric | Imperial |
| Thermal expansion co-efficient (@20-100°C/68-212°F) | 8.60 µm/m°C | 4.78 µin/in°F |
| Thermal conductivity | 6.70 W/mK | 46.5 BTU in/hr.ft².°F |
Grade 23 Ti 6Al 4V ELI alloy can be machined using slow speeds, right quantity of coolant flow and high feed rates. High-speed tools should be used for tooling this alloy and the recommended tool types are tungsten carbide designations C1-C4 or cobalt based.
Grade 23 Ti 6Al 4V ELI alloy can be hot or cold formed. Forming techniques include hydropress, stretch or drop-hammer.
Weldability of grade 23 Ti 6Al 4V ELI alloy is rated as fair.
The material can be solution treated at 904-954 °C (1660-1750°F) for 2 h, and then water quenched.
For annealing grade 23 Ti 6Al 4V ELI alloy, the material has to be held at 732°C (1350°F) for about 1/4 and 4h. It should then be furnace cooled to 566°C (1050°F) then air cooled.
Q1: Do you accept the trial order ?
A1: Yes,if we have the exactly size in stock.we can delivery even 1 piece/meter .
Q2: Can I have free sample before making orders?
){kind=link}