Customization: | Available |
---|---|
Type: | Coil |
Standard: | AISI, ASTM, DIN, JIS, GB |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
305 Stainless Steel is an austenitic chromium nickel stainless steel with a low rate of work hardening. This low rate of work hardening makes it suitable for many deep drawing applications. In order to minimize earring during drawing, the directionality introduced during cold rolling must be kept to a minimum amount. Deep drawing quality should be noted when ordering this alloy. Ordering annealed or dead soft does not guarantee deep drawing quality. Type 305 is non magnetic and becomes magnetic ( at a slow rate) with increasing cold work.
The following table shows the chemical composition of grade 305 stainless steel.
Element | Content (%) |
Iron, Fe | 67 |
Chromium, Cr | 18 |
Nickel, Ni | 12 |
Manganese, Mn | ≤ 2 |
Silicon, Si | ≤ 1 |
Carbon, C | 0.12 |
Phosphorous, P | 0.045 |
Sulfur, S | 0.030 |
Grade | UNS | DIN | EN | AMS | ASTM | JIS | |
305 |
S30500 |
DIN 1.4303 | AMS 5685 AMS 5514 |
ASTM A249
ASTM A492 ASTM A240 ASTM A478 |
- |
Properties | Metric | Imperial |
Density | 8 g/cm3 | 0.289 lb/in³ |
Melting point | 1454°C | 2650°F |
Properties | Metric | Imperial |
Tensile strength, ultimate | 585 MPa | 84800 psi |
Tensile strength, yield (@0.2%) | 260 MPa | 37700 psi |
Modulus of elasticity | 193 GPa | 28000 ksi |
Shear modulus | 86 GPa | 12500 ksi |
Elongation at break (in 50 mm) | 50 | 50 |
Hardness, Brinell | 80 | 80 |
Hardness, Knoop (converted from Brinell hardness) | 97 | 97 |
Hardness, Rockwell B (converted from Brinell hardness) | 45 | 45 |
Hardness, Vickers (converted from Brinell hardness) | 82 | 82 |
Properties | Metric | Imperial |
Thermal expansion co-efficient (@0-100°C/32-212°F) | 17.3 µm/m°C | 9.61 µin/in°F |
Thermal conductivity (@0-100°C/32-212°F) | 16.3 W/mK | 113 BTU in/hr.ft².°F |
The following are the major applications of grade 305 stainless steel:
Q1: Do you accept the trial order ?
A1: Yes,if we have the exactly size in stock.we can delivery even 1 piece/meter .
Q2: Can I have free sample before making orders?