Lork Manufacturing ASTM B407/Uns N08811/DIN 1.4876 Alloy Strip for Heat Treatment Equipment Incoloy 800ht Alloy Coil

• Customization: Available
• Product Type: Tube/Pipe
• Material: Nife
• Carbon Content: Low Carbon
• PCD: 100mm
• ET: 15mm
• Hole: 5
• Key Words: Incoloy 800ht Supplier
• Outside Diameter: 6mm - 1219mm
• Thickness: 0.5mm - 100mm
• Length: as Your Requirments
• Surface: Black, Bright, Polished, Pickling
• MOQ: 100kgs
• Sample: Free-Sample
• Technique: Cold Rolled, Hot Rolled
• Condition: Annealed;Heat Treatment
• Stock: in Stock
• Transport Package: Wooden Package
• Specification: Incoloy 800ht
• Trademark: LORK
• Origin: China
• HS Code: 7505120000
• Production Capacity: 50000kg/Month

Product Description

Product Description

Introduction

LORK is a super alloy manufacturer with 20 years of manufacturing experience.
 

Incoloy 800HT (UNS N08811 / W.Nr. 1.4959) nickel-iron-chromium alloys that have the same basic composition as INCOLOY alloy 800 but with significantly higher creep-rupture strength. The higher strength results from close control of the carbon, aluminum and titanium contents in conjunction with a high temperature anneal. Used in chemical and petrochemical processing, power plants for super-heater and reheater tubing, industrial furnaces and heat-treating equipment.
 

Common Names:

• UNS N08810
• UNS N08811
• Nr. 1.4958
• Nr. 1.4959
• Alloy 800HT

Features

▪ Resistance to prolonged exposure to elevated temperatures
▪ Excellent resistance to oxidation, sulfidation, and carburization
▪ Added Carbon and annealing treatment allows for higher creep and rupture properties above 600ºC
▪ Resistant to high temperature corrosion
▪ Readily machined by standard methods
▪ Best joined/welded using products for high temperature situations
▪ Resistance to aqueous corrosion at moderate temperatures

Incoloy 800ht Application

▪ Chemical and Petrochemical Processing-process equipment for the production of ethylene, ethylene dichloride, acetic anhydride, ketene and oxy-alcohol
▪ Petroleum Refining-steam/hydrocarbon reformers and hydrodealkylation units
▪ Power Generation-steam super-heaters and high temperature heat exchangers in gas-cooled nuclear reactors, heat exchangers and piping systems in coal-fired power plants
▪ Thermal Processing Fixtures-radiant tubes, muffles, retorts and fixtures for heat-treating furnaces

Incoloy 800ht Key Features:

• Corrosion Resistance: The addition of nickel & chromium to 800HT ensures excellent carburization, oxidation, & sulfidation.
• Organic Media Resistance: This alloy also flaunts great resistance to widely found organic media components such as acetic, formic, as well as propionic acids.
• High Heat Fabrication: Alloy 800HT is known to fabricate easily in high heat between 1200°F & 1600°F. However, anything below this leads to improper fabrication.
• High Resistance to Creep Rupture: Incoloy 800HT has better creep-rupture resistance strength as compared to Alloy 800 given the close control for Al, Ti, & C.

Incoloy 800ht Specifications

 

Trademark	GB	GOST	ASTM	UNS	DIN	W.Nr.	NF	BS	JIS	SS
Incoloy 800HT	NS1102 NS112	-	Incoloy 800HT	N08811	X10NiCrAlTi32-20	1.4959	-	NA15H	-	-

Incoloy 800ht Chemical Composition

Alloy	C	Si	Mn	P	S	Cr	Ni	Al+Ti	Ti	Fe
Incoloy 800HT	0.06-0.10	≤0.10	≤3.00	≤0.03	≤0.02	19.0-23.0	30.0-35.0	0.25-1.20	0.15-0.60	≥39.5

 Incoloy 800ht Mechanical Properties

Density, g/cm3	Melting Point, ºC	Tensile Strength, MPa	Yield Strength, MPa	ELongation, %	Hardness, HB
8.00	1357-1375	531	200	52	-

Incoloy 800ht Forms And Standards

Rod, Bar, Wire and Forgings	ASTM B408/ASME SB408, ASTM B564/ASME SB564, ISO 9723/9724/9725
Plate, Sheet and Strip	ASTM A240/A480/B409/B906/ASME SA240/SA480/SB409/SB906, ISO 6208
Pipe and Tube	ASTM B163/ASME SB163, ASTM B407/B829/ASME SB407/SB829, ASTM B514/B775/ASME SB514/SB775, ASTM B515/B751/ASME SB515/SB751, ISO 6207
Welding Product	-
Others	ASTM B366/ASME SB366(Fittings)

Available Sizes And Specifications

Incoloy 800HT available sizes and specifications
Grade	Incoloy 800HT
Nickel plate	Thickness: 0.3mm - 150.0mm Width: 1000mm - 3000mm
Nickel strip/ nickel foil	Thickness: 0.02mm - 16.0mm Width: 5mm - 3000mm
Nickel coil	Thickness: 0.3mm - 16.0mm Width: 1000mm - 3000mm
Nickel pipe	Outside diameter: 6mm - 1219mm Thickness: 0.5mm - 100mm
Nickel Capillary Pipe	Outside diameter: 0.5mm - 6.0mm Thickness: 0.05mm - 2.0mm
Nickel bar	Diameter: Ф4mm - Ф600mm
Nickel wire rod	Diameter:Ф0.01mm - Ф6mm

 

Detection

Processing

 

Packaging & Shipping

Company Profile

FAQ

Q1: Do you accept the trial order ?
A1: Yes,if we have the exactly size in stock.we can delivery even 1 piece/meter .

Q2: Can I have free sample before making orders?

A2: Yes,we can supply free sample as requirement,but buyer needs to pay the freight charges ,the freight fee will return to buyer after making order.

Q3: How do you control the quality ?
A3: MTC and PMI will be sent before shipment,any 3rd party inspection if need .

Q4: How about your delivery time ?
A4: Generally delivery time is 15 working days .

Q5: How can I quickly get the price list ?
A5: Directly click "chat now" or send us email with detail specifications,you will get the official price list in 1 hour .