Lork Uns N04405/ASTM B164 Nickel Alloy Rod for Marine Engineering Equipment Monel R405 Alloy Bar

• Customization: Available
• Product Type: Rod
• Material: Nife
• Carbon Content: Low Carbon
• PCD: 100mm
• ET: 10mm
• Hole: 5
• Key Words: Monel R405 Bar
• Diameter: 3-300mm
• Length: as Your Requirments
• Shape: Round.Square.Rectangle
• Sample: Free-Sample
• MOQ: 100kgs
• Technique: Cold Rolled, Hot Rolled
• Surface: Polished, Mirror, Hl ,180 Grit, 400 Grit, 600 Grit
• Stock: in Stock
• Trade Term: Fob CIF CFR EXW etc
• Transport Package: Wooden Package
• Specification: monel R405
• Trademark: LORK
• Origin: China
• HS Code: 7505120000
• Production Capacity: 50000kg/Month

Product Description

Product Description

 

Introduction

LORK GROUP has been developing in the field of metal, stainless steel and alloy for more than 40 years, realizing the integrated supply chain management application from raw materials to deep processing and quality inspection, Professional Quality, Humanistic Lork, Scientific and Technological Future.

Monel R-405 (UNS N04405 / W.Nr. 2.4360, 2.4361 the free-machining version of Monel 400. A controlled amount of sulfur is added to the alloy to provide sulfide inclusions that act as chip breakers during machining. A Ni-Cu alloy with high strength and excellent resistance to a range of media including seawater, hydrofluoric and sulfuric acids, and alkalies. Used in marine and offshore engineering, chemical andhydrocarbon processing equipement, valves, pumps, shafts, fittings, fasteners, and heat exchangers.

Monel R405 Features

▪ Resistant to seawater and steam at high temperatures
▪ Excellent resistance to rapidly flowing brackish water or seawater
▪ Excellent resistance to stress corrosion cracking in most freshwaters
▪ Particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated
▪ Offers some resistance to hydrochloric and sulfuric acids at modest temperatures and concentrations, but is seldom the material of choice for these acids
▪ Excellent resistance to neutral and alkaline salt
▪ Resistance to chloride induced stress corrosion cracking
▪ Good mechanical properties from sub-zero temperatures up to 1020° F
▪ High resistance to alkalis

Monel R405 Applications

▪ Marine engineering
▪ Chemical and hydrocarbon processing equipment
▪ Gasoline and freshwater tanks
▪ Crude petroleum stills
▪ De-aerating heaters
▪ Boiler feed water heaters and other heat exchangers
▪ Valves, pumps, shafts, fittings, and fasteners
▪ Industrial heat exchangers
▪ Chlorinated solvents
▪ Crude oil distillation towers

 

Monel R405 Specifications

Trademark	GB	GOST	ASTM	UNS	DIN	W.Nr.	NF	BS
Monel R-405	MCu-28-1.5-1.8	НМЖМц28-2.5-1.5	Monel R-405	N04405	NiCu30Fe	2.43602.4361	Nu30	Ni68Cu28FeNA12

Chemical Compositions Of Monel R-405 Nickel Alloy

Alloy	C	Si	Mn	P	S	Ni	Cu	Fe
Monel R-405	≤0.30	≤0.50	≤2.00	≤0.030	0.025-0.060	≥63.0	28.0-34.0	≤2.50

Typical Physical And Mechanical Properties (RT, Annealed+Aged)

Density, g/cm3	Melting Point, ºC	Tensile Strength, MPa	Yield Strength, MPa	ELongation, %	Hardness, HRB
8.5	1315-1350	1100	790	20	/

Monel R405 Form And Standard

Rod, Bar, Wire and Forgings	ASTM B865, ASME SB865, DIN 17752, DIN 17753, DIN 17754
Plate, Sheet and Strip	DIN 17750
Pipe and Tube	DIN 17751
Welding Product	-
Others	ASTM B366, ASME SB366, DIN 17743

Available Sizes And Specifications

Monel R-405 available sizes and specifications
Grade	Monel R-405
Nickel plate	Thickness: 0.3mm - 150.0mm Width: 1000mm - 3000mm
Nickel strip/ nickel foil	Thickness: 0.02mm - 16.0mm Width: 5mm - 3000mm
Nickel coil	Thickness: 0.3mm - 16.0mm Width: 1000mm - 3000mm
Nickel pipe	Outside diameter: 6mm - 1219mm Thickness: 0.5mm - 100mm
Nickel Capillary Pipe	Outside diameter: 0.5mm - 6.0mm Thickness: 0.05mm - 2.0mm
Nickel bar	Diameter: Ф4mm - Ф600mm
Nickel wire rod	Diameter:Ф0.01mm - Ф6mm

Detection

 

Processing

 

Packaging & Shipping

 

Company Profile

 

FAQ

Q1: Do you accept the trial order ?
A1: Yes,if we have the exactly size in stock.we can delivery even 1 piece/meter .

Q2: Can I have free sample before making orders?

A2: Yes,we can supply free sample as requirement,but buyer needs to pay the freight charges ,the freight fee will return to buyer after making order.

Q3: How do you control the quality ?
A3: MTC and PMI will be sent before shipment,any 3rd party inspection if need .

Q4: How about your delivery time ?
A4: Generally delivery time is 15 working days .

Q5: How can I quickly get the price list ?
A5: Directly click "chat now" or send us email with detail specifications,you will get the official price list in 1 hour .