| Customization: | Available |
|---|---|
| Type: | Stainless Steel Bars |
| Standard: | ASTM, AISI, GB, JIS, DIN, EN |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
LORK is a special stainless steel manufacturer with 20 years of manufacturing experience.
Super Duplex UNS S32760 is among the most common super duplex grade in the market. UNS S32760 is a duplex stainless steel especially designed for service in aggressive chloride-containing environments and has additions of W and Cu compared to UNS S32750. It has very good resistance to localized corrosion and stress corrosion cracking in combination with high mechanical strength.
Containing 25% chromium, 7% nickel, 3.6% molybdenum as well as copper, tungsten, and nitrogen, UNS S32760 is a highly alloyed super duplex stainless steel with high PREN for use in aggressive environments.
This is a super duplex grade with a ferritic-austenitic microstructure. The alloy consists of around 40-50% ferrite in the annealed condition. The super duplex microstructure has the high strength of the ferritic grades whilst retaining the corrosion resistance of the austenitic grades. It is not uncommon to see the metal used as a practical solution to chloride-induced stress cracking, which is the Achilles' heel of stainless steel.
It also has outstanding resistance against sulphide-stress corrosion cracking in sour-gas environments.
Well known for its high impact strength, UNS S32760 displays no ductile-brittle transition but only a slight reduction in impact energy as temperature decreases. Even when welded, UNS S32760 displays only slightly lower impact strength.
It was initially developed as a seawater resistant material for pump applications in the North Sea. Following its success, it became the desired material for a wide range of uses including oil and gas applications, seawater, subsea pipework systems, heat exchangers and more.
Duplex Stainless S32760 Applications
▪ UNS S32760 can be used in a variety of applications including:
▪ Desalination plants
▪ Seawater systems
▪ Heat exchangers
▪ Subsea pipework systems
▪ Flue gas desulphurisation (FGD) plants
▪ Centrifuges and agitators
▪ Valves and pumps
▪ Storage tanks and pressure vessels
|
Weight % |
C |
Si |
Mn |
S |
P |
Cr |
Ni |
Mo |
N |
Cu |
W |
|
Min. |
|
|
|
|
|
24,00 |
6,00 |
3,00 |
0,20 |
0,50 |
0,50 |
|
Max. |
0,030 |
1,00 |
1,00 |
0,010 |
0,030 |
26,00 |
8,00 |
4,00 |
0,30 |
1,00 |
1,00 |
PREN= (Cr%+3.3Mo%+16N%) ≥ 40
Product Standards: EN 10088-3, ASTM A276, ASTM A479, ASTM A182-11A
(Chemical composition and mechanical properties only)
Approvals: NACE MR0175, NORSOK M650, NORSOK M630 MDS D53/ D54/ D55/ D57
|
Yield strength Rp0.2, MPa |
Tensile strength Rm, MPa |
Elongation [%] |
Hardness [HB] |
Impact, Charpy-V, -46ºC [J] |
Pre |
|
|
Bar |
≥ 550 |
≥ 750 |
≥ 25 |
≤ 310 |
≥ 45 |
≥ 40 |
|
Sheet |
≥ 550 |
750 - 1000 |
≥ 25 |
≤ 310 |
≥ 45 |
≥ 40 |
|
Plate |
≥ 550 |
750 - 930 |
≥ 25 |
≤ 310 |
≥ 45 |
≥ 40 |
|
Plate |
≥ 550 |
750 - 930 |
≥ 25 |
≤ 310 |
≥ 45 |
≥ 40 |
Q1: Do you accept the trial order ?
A1: Yes,if we have the exactly size in stock.we can delivery even 1 piece/meter .
Q2: Can I have free sample before making orders?
){kind=link}