Lork Uns N06617/ASTM B166/AMS 5887 Nickel Alloy Rod for Petrochemical Processing Inconel 617 Alloy Bar

• Customization: Available
• Product Type: Rod
• Material: Nife
• Carbon Content: Low Carbon
• PCD: 100mm
• ET: 15mm
• Hole: 4
• Key Words: Inconel 617 Supplier
• Thickness: 0.3mm - 150.0mm
• Width: 1000mm - 3000mm
• Length: as Your Requirments
• Surface: Black, Bright, Polished, Pickling
• MOQ: 100kgs
• Sample: Free-Sample
• Technique: Cold Rolled, Hot Rolled
• Condition: Annealed;Heat Treatment
• Stock: in Stock
• Transport Package: Wooden Package
• Specification: Inconel 617
• Trademark: LORK
• Origin: China
• HS Code: 7505120000
• Production Capacity: 50000kg/Month

Product Description

Product Description

 

Introduction

LORK is a super alloy manufacturer with 20 years of manufacturing experience.
 

Inconel 617 offers great oxidation resistance and high-temperature strength. A unique combination of chromium-nickel-cobalt, it prevents spalling, carburization, and aqueous corrosion. The process of technology and equipment that are used in the process influence the work hardening rate and strength of the alloy.

Alloy Inconel 617 is commonly used in land base gas turbines, fossil fuels, aerospace, power production plants and catalyst grid support in acid processing.

• Resistant to corrosive aqueous conditions
• Easily welded through conventional process
• Resistant to both oxidizing and reducing media
• Creep and stress rupture strength

Inconel 617 Application

• Combustion Cans
• Transition liners
• Land-based gas turbines
• Aircrafts
• Heat-treating baskets
• Power generation
• Petrochemical plants
• High-temperature gas components

Inconel 617 Key Features:

• Corrosion Resistance: This Alloy consists of a considerable amount of nickel, chromium, and aluminum, offering high degree resistance to oxidation and carburization.
• Good Fabrication: Inconel alloy 617 has excellent fabricability. Welding, forming, and machining are carried out by standard procedures for nickel alloys.
• High-Stress Rupture Strength: Inconel offers the high scale of stress rupture and creep strength at the elevated temperature which is above 1800^o
• High Bending Ductility: The alloy offers high bending ductility at the standard machining temperature.

Inconel 617 Common Names:

• Alloy 617
• UNS N06617
• Nickel Alloy 617

Inconel 617 Executive Standards:

Forging Stock, Wire, Bar, & Rod	Sheet, Plate, & Strip:	Pipe & Tube
ASTM B 166/ASME SB 166 ASTM B 564/ASME SB 564 DIN 17753 VdTÜV 485 ISO 9724 DIN 17752 SAE AMS 5887 DIN 17754	ASTM B 168/ASME SB 168 DIN 17750 VdTÜV 485 SAE AMS 5888 ISO 6208 SAE AMS 5889	ASTM B 546/ASME SB 546 VdTÜV 485 ISO 6207 DIN 17751

 

Incobel 617 Chemical Properties:

Iron (%)	3.0 Maximum
Nickel (%)	44.5 Minimum
Chromium (%)	20.0 to 24.0
Molybdenum (%)	8.0 to 10.0
Titanium (%)	0.6 Maximum
Manganese (%)	1.0 Maximum
Silicon (%)	1.0 Maximum
Aluminum (%)	0.8 to 1.5
Sulfur (%)	0.015 Maximum
Carbon (%)	0.05 to 0.15
Copper (%)	0.5 Maximum
Cobalt (%)	10.0 to 15.0
Boron (%)	0.006 Maximum

Incobel 617 Mechanical Properties:

Tensile (MPA)	485 Maximum
Tensile (PSI)	70300 Maximum
Yield (MPA)	275 Maximum
Yield (PSI)	39900 Maximum
Hardness (Metric) (Imp) (Brinell)	170
Elongation (%)	25 % Maximum

Inconel 617 Physical Properties:

Density	Lb/In^3	0.302
	Mg/m^3	8.36
Specific Heat at 78^oF	Btu/Ib.^oF	0.100
	J/Kg.^oC	419
Electrical Resistivity at 78^oF	Ohm.circ mil/ft	736
	µ-m	1.22
Melting Range	^oF	2430 to 2510
	^oC	1332 to 1380

Available Sizes And Specifications

Inconel 617 available sizes and specifications
Grade	Inconel 617
Nickel plate	Thickness: 0.3mm - 150.0mm Width: 1000mm - 3000mm
Nickel strip/ nickel foil	Thickness: 0.02mm - 16.0mm Width: 5mm - 3000mm
Nickel coil	Thickness: 0.3mm - 16.0mm Width: 1000mm - 3000mm
Nickel pipe	Outside diameter: 6mm - 1219mm Thickness: 0.5mm - 100mm
Nickel Capillary Pipe	Outside diameter: 0.5mm - 6.0mm Thickness: 0.05mm - 2.0mm
Nickel bar	Diameter: Ф4mm - Ф600mm
Nickel wire rod	Diameter:Ф0.01mm - Ф6mm

 

Detection

Processing

 

Packaging & Shipping

Company Profile

FAQ

Q1: Do you accept the trial order ?
A1: Yes,if we have the exactly size in stock.we can delivery even 1 piece/meter .

Q2: Can I have free sample before making orders?

A2: Yes,we can supply free sample as requirement,but buyer needs to pay the freight charges ,the freight fee will return to buyer after making order.

Q3: How do you control the quality ?
A3: MTC and PMI will be sent before shipment,any 3rd party inspection if need .

Q4: How about your delivery time ?
A4: Generally delivery time is 15 working days .

Q5: How can I quickly get the price list ?
A5: Directly click "chat now" or send us email with detail specifications,you will get the official price list in 1 hour .