| Customization: | Available |
|---|---|
| Product Type: | Sheet |
| Material: | Nife |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
LORK is a alloy manufacturer with 20 years of manufacturing experience.
GH6783 is a Co-Ni-Fe based precipitation hardening ferromagnetic oxidation resistant low expansion deformation high temperature alloy with a service temperature of less than 750ºC. The alloy is strengthened by adding a large amount of aluminum and niobium elements, and precipitating γ'-Ni3 (Al, Nb) dispersion strengthening phase and blocky β-NiAl phase during aging. The alloy can reach a complete oxidation resistance level at 750ºC, and has excellent room temperature and high temperature mechanical properties, low thermal expansion coefficient and low density. The fine grain size can be controlled by precipitating β-NiAl phase during thermal deformation. The micro-alloyed alloy has excellent hot working properties and cold forming process properties. Hankai's main supply products include bars, cakes, rings, cold-rolled sheets and strips.
GH6783 high-temperature alloy has been used to manufacture gap control components such as sealing rings, bearing rings and casings of advanced aircraft engines.
Bolts and other fasteners and bearing shafts and other components serving at medium and high temperatures in ground gas turbines,
Air guide tubes of rocket engines, etc.
Compared with other low expansion high-temperature alloys GH2907 and GH2909, the excellent oxidation resistance and low density of GH6738 alloy are the main characteristics of this alloy. The alloy has excellent performance and structural stability below 700ºC, but poor thermal stability above 750ºC.
| C | Cr | Ni | Co | Ta | Fe | Ti | |
| ≤0.03 | 2.5~3.5 | 26~30 | Bal | ≤0.05 | 24~27 | ≤0.4 | |
| Al | Nb | B | Mn | Si | P | S | Cu |
| 5~6 | 2.5~3.5 | 0.003~0.012 | ≤0.5 | ≤0.5 | ≤0.015 | ≤0.005 | ≤0.5 |
| Form | Condition | Tensile (Ksi) | 0.2% Yield (Ksi) | Elongation % | Hardness (HRB) |
| Bar | Hot finished | 60-85 | 15-45 | 55-35 | 45-80 |
| Bar | Cold drawn | 55-75 | 15-30 | 55-40 | 45-70 |
| Plate | Hot rolled | 55-80 | 15-40 | 60-40 | 45-75 |
| Sheet | Annealed | 5-75 | 15-30 | 55-40 | 70 max |
| Pipe | Annealed | 55-75 | 12-30 | 60-40 | 70 max |
| GH6783 available sizes and specifications | |
| Grade | GH6783 |
| Nickel plate | Thickness: 0.3mm - 150.0mm Width: 1000mm - 3000mm |
| Nickel strip/ nickel foil | Thickness: 0.02mm - 16.0mm Width: 5mm - 3000mm |
| Nickel coil | Thickness: 0.3mm - 16.0mm Width: 1000mm - 3000mm |
| Nickel pipe | Outside diameter: 6mm - 1219mm Thickness: 0.5mm - 100mm |
| Nickel Capillary Pipe | Outside diameter: 0.5mm - 6.0mm Thickness: 0.05mm - 2.0mm |
| Nickel bar | Diameter: Ф4mm - Ф600mm |
| Nickel wire rod | Diameter:Ф0.01mm - Ф6mm |
Q1: Do you accept the trial order ?
A1: Yes,if we have the exactly size in stock.we can delivery even 1 piece/meter .
Q2: Can I have free sample before making orders?
){kind=link}