| Customization: | Available |
|---|---|
| Type: | Stainless Steel Coils |
| Standard: | ASTM, AISI, GB, JIS, DIN, EN |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
LORK is a special stainless steel manufacturer with 20 years of manufacturing experience.
348 alloy contains chromium nickel and iron as its major components. Moreover, elements like columbium or tantalum can also be used to increase intergranular corrosion resistance. Basically, SS 348 is almost similar to grade 321. SS 348 H Sheets & Plates offers high corrosion resistance when compared to other steels due to the presence of large amounts of chromium. The alloy is crystalline in structure and it is precipitation hardened steel. Stainless Steel 348H Plates can be easily wielded by using different convenient methods. These Sheets & Plates are very ductile and have very high toughness. ANTON offers only the best quality Sheets & Plates to our clients at very affordable rates. These SS 348H Sheets are very useful in nuclear applications, chemical equipment, pharmaceuticals, marine applications as well.
348H Stainless Steel Designations
Other designations equivalent to grade 348 stainless steel are included in the following table.
| ASTM A167 | ASTM A312 | ASTM A479 | QQ S766 | ASME SA376 |
| ASTM A182 | ASTM A314 | ASTM A580 | ASME SA182 | ASME SA403 |
| ASTM A213 | ASTM A336 | ASTM A632 | ASME SA213 | ASME SA409 |
| ASTM A240 | ASTM A358 | ASTM A813 | ASME SA240 | ASME SA479 |
| ASTM A249 | ASTM A376 | ASTM A814 | ASME SA249 | MIL-S-23196 |
| ASTM A269 | ASTM A403 | DIN 1.4550 | ASME SA312 | SAE 30348 |
| ASTM A276 | ASTM A409 | MIL S-23195 | ASME SA358 | SAE J405 (30348) |
| Element | 348H (%) |
| Iron, Fe | |
| Chromium, Cr | 17.0-19.0 |
| Nickel, Ni | 9.0-13.0 |
| Manganese, Mn | 2.0 |
| Silicon, Si | 1.0 |
| Nb + Ta | 0.8 |
| Cobalt, Co | 0.2 |
| Tantalum, Ta | 0.1 |
| Carbon, C | 0.04-0.1 |
| Phosphorous, P | 0.045 |
| Sulfur, S | 0.03 |
Stainless Steel 348H Mechanical Properties
| Properties | Metric | Imperial |
| Tensile strength | 655 MPa | 95000 psi |
| Yield strength (@ strain 0.200%) | 275 MPa | 39900 psi |
| Izod impact | 120 - 160 J | 88.5 - 118 ft-lb |
| Charpy impact | 160 J | 118 ft-lb |
| Shear modulus (typical for steel) | 77.0 GPa | 11200 ksi |
| Elastic modulus | 190-210 GPa | 27557-30458 ksi |
| Poisson's ratio | 0.27-0.30 | 0.27-0.30 |
| Elongation at break (in 50 mm) | 45% | 45% |
| Hardness, Brinell (converted from Rockwell B hardness) | 147 | 147 |
| Hardness, Knoop (converted from Rockwell B hardness) | 164 | 164 |
| Hardness, Rockwell B | 85 | 85 |
| Hardness, Vickers (converted from Rockwell B hardness) | 169 | 169 |
Grade 348 stainless steel can be welded using fusion and resistance welding methods. Oxyacetylene welding method is not preferred for this alloy. AWS E/ER348 filler metal can be used when required.
Grade 348 stainless steel can be hot worked at 1149-1232°C (2100-2250°F). It should not be heated below 927°C (1700°F). It is water quenched or fully annealed to restore corrosion resistance property.
Grade 348 stainless steel is ductile and tough, and can be readily blanked, stamped, drawn and spun.
Grade 348 stainless steel is annealed at 1010-1093°C (1850-2000°F) followed by quenching in water.
Grade 348 stainless steel does not react to heat treatment. However, elevated properties can be obtained by cold reduction.
Grade 348 stainless steel is used in different kinds of nuclear applications.
Available Sizes And Specifications
| 348/348H stainless steel pipe sizes and specifications | |
| Grade | 348/348H |
| Stainless steel seamless pipe | Outside diameter: 4.0 - 1219mm, Thickness: 0.5 -100mm,Length: 24000mm |
| Stainless steel welded pipe | Outside diameter: 6.0 - 2800mm, Thickness: 0.3 -45mm,Length: 18000mm |
| Stainless steel capillary pipe | Outside diameter: 0.4 - 16.0mm, Thickness: 0.1 -2.0mm,Length: 18000mm |
| Stainless steel welded sanitary pipe | Outside diameter:8.0- 850mm, Thickness: 1.0 -6.0mm |
| Stainless steel seamless sanitary pipe | Outside diameter: 6.0- 219mm, Thickness: 1.0 -6.0mm |
| Stainless steel square pipe | Side Length: 4*4 - 300*300mm, Thickness: 0.25 - 8.0mm, Length: 18000mm |
| Stainless steel rectangular pipe | Side Length: 4*6 - 200*400mm, Thickness: 0.25 - 8.0mm, Length: 18000mm |
| Stainless steel coil pipe | Outside diameter: 0.4 - 16mm, Thickness: 0.1 - 2.11mm |
| Standard | American Standard: ASTM A312, ASME SA269, ASTM A269, ASME SA213, ASTM A213 ASTM A511 ASTM A789, ASTM A790, ASTM A376, ASME SA335, B161, SB163, SB338, SB667/668Germany Standard: DIN2462.1-1981, DIN17456-85, DIN17458-85·European Standard: EN10216-5, EN10216-2Japanese Standard: JIS G3463-2006, JISG3459-2012Russian Standard: GOST 9941-81 |
Q1: Do you accept the trial order ?
A1: Yes,if we have the exactly size in stock.we can delivery even 1 piece/meter .
Q2: Can I have free sample before making orders?
){kind=link}