| Customization: | Available |
|---|---|
| Product Type: | Coil |
| Material: | Aluminum Alloy |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
LORK exports a wide range of monel 400 tube which performs brilliantly in large temperature and concentration ranges.
7075 (UNS A97075) is an aerospace aluminum bar with cold finished or extruded aluminum wrought alloy with high strength, adequate machinability and improved stress corrosion control. Fine grain control results in good tool wear.
7075 is one of the highest strength aluminum alloys. It has good fatigue strength and average machinability. Often used where parts are highly stressed. It is not weld able and has less corrosion resistance than other aluminum alloys. The mechanical properties depend on the temper of the material. Commonly used in the bicycle industry, aircraft structures, and in rifles for the American military. We stock 7075-T651, 7075-T6511, 7075-T7351, 7075-T3511 and 7075-T76511.
Available shapes: Flats, squares and rounds
Tempers:
T6,
T651,
T73,
T7351
Specifications:
ASTM B211
AMS QQ-A-225/9
AMS 4123F
UNS A97075
ISO AlZn5.5MgCu
AA 7075-T6
Al 7075-T6
AA7075-T73
Al 7075-T73
The following table shows the chemical composition of Aluminium / Aluminum 7075 alloy.
| Element | Content (%) |
| Al | 90 |
| Cr | 0.18 - 0.28 |
| Cu | 1.2 - 2 |
| Fe | 0.5 max |
| Mg | 2.1 - 2.9 |
| Mn | 0.3 max |
| Si | 0.4 max |
| Ti | 0.2 max |
| Zn | 5.1 - 6.1 |
| Zr+Ti | 0.25 max |
The physical properties of Aluminium / Aluminum 7075 alloy are tabulated below.
| - O | -T6 | -T651 | -T73 | -T7351 | |
| Density | 0.1 lb/in3 | 0.1 lb/in3 | 0.1 lb/in3 | 0.1 lb/in3 | 0.1 lb/in3 |
| Ultimate Tensile Strength | max. 40 ksi(bare); max. 39 ksi(clad) | 83 ksi(bare); 76 ksi (clad) | 80 ksi | 72.2 ksi | 73.2 ksi |
| Yield Tensile Strength | max. 21 ksi | 73 ksi(bare); 67 ksi(clad) | 67 ksi | 63.1 ksi | 63.1 ksi |
| Fatigue Strength | 18 ksi | 23 ksi | 23 ksi | 20.8 ksi | 21.8 ksi |
| Shear Strength | 22 ksi | 48 ksi(bare); 46 ksi(clad) | 48 ksi | 42.5 ksi | 43.5 ksi |
| Shear Modulus | 3,900 ksi | 3,800 ksi | 3,800 ksi | 3,900 ksi | 3,900 ksi |
| Hardness Rockwell | Brinell | B17 | 60 | B87 | 150 | B87 | 150 | B82 | 135 | B82 | 135 |
| Elongation at Break Percentage | min. 10% | 11% | 8.2% | 7.1% | 7.5% |
| Modulus of Elasticity | 10,400 ksi | 10,400 ksi | 10,000 ksi | 10,400 ksi | 10,400 ksi |
| Poisson's Ratio | 0.32 | 0.32 | 0.32 | 0.32 | 0.32 |
| Machinability Percentage | N/A | 70% | 70% | 70% | 70% |
| Melting Point | 890-1,180 °F | 890-1,180 °F | 890-1,180 °F | 890-1,180 °F | 890-1,180 °F |
| Specific Heat | 2.29 x 10^-1 BTU/lb-°F | 2.29 x 10^-1 BTU/lb-°F | 2.29 x 10^-1 BTU/lb-°F | 2.29 x 10^-1 BTU/lb-°F | 2.29 x 10^-1 BTU/lb-°F |
| Thermal Conductivity | 1,200 BTU-in/hr-ft^2-°F | 900 BTU-in/hr-ft^2-°F | 900 BTU-in/hr-ft^2-°F | 1,080 BTU-in/hr-ft^2-°F | 1,080 BTU-in/hr-ft^2-°F |
| Electrical Conductivity | 33% IACS | 33% IACS | 33% IACS | 33% IACS | 33% IACS |
The mechanical properties of Aluminium / Aluminum 7075 alloy are outlined in the following table.
| Properties | Metric | Imperial |
| Tensile strength | 515 MPa | 74695 psi |
| Yield strength | 455 MPa | 65992 psi |
| Fatigue strength | 240 MPa | 34809 psi |
| Elastic modulus | 70-80 GPa | 10153-11603 ksi |
| Poisson's ratio | 0.33 | 0.33 |
| Elongation | 11% | 11% |
Q1: Do you accept the trial order ?
A1: Yes,if we have the exactly size in stock.we can delivery even 1 piece/meter .
Q2: Can I have free sample before making orders?
){kind=link}