Lork High Quality Uns S30403/ISO X2crni19-11/SUS304L Heat Resistant Steel Rod for Heat Exchanger 304L Stainless Steel Bar

Product Details
Customization: Available
Type: Stainless Steel Bars
Standard: ASTM, AISI, GB, JIS, DIN, EN
Manufacturer/Factory, Group Corporation
Diamond Member Since 2024

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

  • Lork High Quality Uns S30403/ISO X2crni19-11/SUS304L Heat Resistant Steel Rod for Heat Exchanger 304L Stainless Steel Bar
  • Lork High Quality Uns S30403/ISO X2crni19-11/SUS304L Heat Resistant Steel Rod for Heat Exchanger 304L Stainless Steel Bar
  • Lork High Quality Uns S30403/ISO X2crni19-11/SUS304L Heat Resistant Steel Rod for Heat Exchanger 304L Stainless Steel Bar
  • Lork High Quality Uns S30403/ISO X2crni19-11/SUS304L Heat Resistant Steel Rod for Heat Exchanger 304L Stainless Steel Bar
  • Lork High Quality Uns S30403/ISO X2crni19-11/SUS304L Heat Resistant Steel Rod for Heat Exchanger 304L Stainless Steel Bar
  • Lork High Quality Uns S30403/ISO X2crni19-11/SUS304L Heat Resistant Steel Rod for Heat Exchanger 304L Stainless Steel Bar
Find Similar Products
  • Overview
  • Product Description
  • Surface Treatment
  • Detection
  • Processing
  • Packaging & Shipping
  • Company Profile
  • FAQ
Overview

Basic Info.

Grade
300 Series
Certification
ISO, AISI, ASTM, GB
Shape
Round
Technique
Cold Rolled
Surface Treatment
Pickling
Key Words
304L Bar
Diameter
2mm - 600mm
Width
1.5mm - 250 mm
Length
as Your Requirments
Diameter Tolerance
H9, H11, H13, K9, K11, K13 etc
Sample
Free-Sample
Surface
Lack, Peeled, Polishing, Bright, Sand Blast, Hl
MOQ
100kgs
Stock
in Stock
Transport Package
Wooden Package
Specification
304L rod
Trademark
LORK
Origin
China
HS Code
7219350000
Production Capacity
50000kg/Month

Product Description

Product Description

 

Introduction

LORK is a special stainless steel manufacturer with 20 years of manufacturing experience.
 

304L grade stainless steel is one of the most widely used stainless steel grade. This grade is very close to 304 grade stainless steel and it is also shown as 1.4307 or X2CrNi18-9 according to EN norm. It is also known as UNS S30403 according to UNS norm. Name 304L can be explained by separating 304 and L. L means Low and low indicates the low carbon content of the material so 304L means 304 grade with low carbon content and the rest of the properties are nearly same with 304 grade stainless steel. 304L grade material has a slightly better weldability then 304 grade because of lower carbon content.

 

304L grade stainless steel has a lower carbon content then %0.03. 304L grade can be used in all applications where 304 grade is also accepted. Finally, the lower carbon content allows this grade to have a better elasticity, so if better elasticity and better weldability is required, 304L will be a better choose then 304 grade. In Birçelik warehouse, you can find 304L grade in UGIMA and UGIMA X versions and these versions has a better machinability then the standard 304L grades.


 Stainless Steel 304L Applications


304L Stainless Steel is used in a wide variety of home and commercial applications, including:
▪ Food processing equipment, particularly in beer brewing, milk processing, and wine making
▪ Kitchen benches, sinks, troughs, equipment, and appliances
▪ Architectural trim and molding
▪ Automotive and aerospace structural use
▪ Construction material in large buildings
▪ Chemical containers, including for transport
▪ Heat exchangers
▪ Nuts, bolts, screws, and other fasteners in the marine environment
▪ Dyeing industry
▪ Woven or welded screens for mining, quarrying & water filtration

 

304L Stainless Steel Corrosion Resistance

304L has good resistance to atmospheric corrosion, foods and beverages and to many organic and inorganic chemicals in moderately oxidizing to moderately reducing environments. The high chromium content of the alloy provides resistance to oxidizing solutions.
304L also resists moderately aggressive organic acids such as acetic. The nickel present in the alloy provides resistance to moderately reducing solutions such as pure phosphoric acid, whatever the concentration, in cold solutions and up to 10% diluted hot solutions. The alloy can also operate successfully in caustic solutions free of chlorides or Alloy 304/304L does not perform well in more highly reducing environments such as those containing chlorides and sulfuric acid.
304L performs well in fresh water service with low levels of chlorides (less than 100ppm). At higher chloride levels the grade is susceptible to crevice corrosion and pitting. For successful performance under these more severe conditions, higher molybdenum content is need such as 316/316L. 304/304L is not recommended for service in marine environments.
In most instances, the corrosion resistance of 304, 304L and 304H will be roughly equal in most corrosive environments. However, in environments that are sufficiently corrosive to cause intergranular corrosion of welds and heat-affected zones 304L should be used because of its low carbon content.

Stainless Steel 304L Chemical Composition

 

  C Mn Si P S Cr Ni N
304L 0.03 max 2.0 max 0.75 max 0.045 max 0.03 max 18.0 -20.0 8.0-12.0 0.1 max

Stainless Steel 304L Mechanical Properties

  Tensile Strength ksi (min) Yield Strength 0.2% ksi (min) Elongation % Hardness        (Brinell) MAX
304L 70 25 40 201

Available Sizes And Specifications

304L stainless steel profile sizes and specifications
Grade 304L
Specification EN, DIN, JIS, ASTM, BS, ASME, AISI, ISO
Standard ASTM A276/ASME SA276, ASTM A479/ASME SA479 & ASTM A164/ASME SA164 .
Stainless steel round Bar Diameter: 2mm - 600mm
Stainless steel bright Bar Diameter: 2mm - 600mm
Stainless steel hex Bar Dimension: 6mm - 80mm
Stainless steel square bar Dimension: 3.0 - 180mm
Stainless steel flat bar Thickness: 0.5mm - 200mm, Width: 1.5mm - 250 mm
Stainless steel angle bar as requirements
Length Normally 6m, or produce as requirements
Surface Black, Bright. Peeled and Polished, Solution annealed.
Delivery condition cold drawn, hot rolled, forged, grinding, centerless grinding
Tolerance H8, H9, H10, H11, H12, H13,K9, K10, K11, K12 or as per clients' requirements

Surface Treatment

 

Lork High Quality Uns S30403/ISO X2crni19-11/SUS304L Heat Resistant Steel Rod for Heat Exchanger 304L Stainless Steel Bar

Detection


Lork High Quality Uns S30403/ISO X2crni19-11/SUS304L Heat Resistant Steel Rod for Heat Exchanger 304L Stainless Steel Bar

Processing

Lork High Quality Uns S30403/ISO X2crni19-11/SUS304L Heat Resistant Steel Rod for Heat Exchanger 304L Stainless Steel Bar
 

Packaging & Shipping


Lork High Quality Uns S30403/ISO X2crni19-11/SUS304L Heat Resistant Steel Rod for Heat Exchanger 304L Stainless Steel Bar
Lork High Quality Uns S30403/ISO X2crni19-11/SUS304L Heat Resistant Steel Rod for Heat Exchanger 304L Stainless Steel Bar

Company Profile


Lork High Quality Uns S30403/ISO X2crni19-11/SUS304L Heat Resistant Steel Rod for Heat Exchanger 304L Stainless Steel Bar

FAQ


Q1: Do you accept the trial order ?
A1: Yes,if we have the exactly size in stock.we can delivery even 1 piece/meter .

Q2: Can I have free sample before making orders?

A2: Yes,we can supply free sample as requirement,but buyer needs to pay the freight charges ,the freight fee will return to buyer after making order.

Q3: How do you control the quality ?
A3: MTC and PMI will be sent before shipment,any 3rd party inspection if need .

Q4: How about your delivery time ?
A4: Generally delivery time is 15 working days .

Q5: How can I quickly get the price list ?
A5: Directly click "chat now" or send us email with detail specifications,you will get the official price list in 1 hour .

 

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier