| Customization: | Available |
|---|---|
| Color: | Silver |
| Application: | Transportation Tools, Door & Window, Glass Wall, Heat Sink, Decorations |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
LORK exports a wide range of 1050 Aluminium tube which performs brilliantly in large temperature and concentration ranges.
1050 aluminum alloy is a very common commercial purity alloy. 1050 aluminum has 99.50% minimum purity and the remaining 0.5% is made up of mostly iron and silicon. It was designated "Al99,5" in the earlier German DIN specifications. 1050 is a soft aluminum alloy that offers good electrical and thermal conductivity, as well as good general corrosion resistance. Aluminum 1050 a very popular material in many industries, and typically it is used in application where material's strength is not important.
Aluminium alloy 1050 is used for:
2036 Aluminum Alloy Specifications:
Aluminium alloy 1050 also corresponds to the following designations:
The following table shows the chemical composition of Aluminium / Aluminum 1050 alloy.
| Element | Content (%) |
| Cu | 0-0.05 |
| Mg | 0-0.05% |
| Si | 0-0.25% |
| Fe | 0-0.4% |
| Mn | 0-0.05% |
| Zn | 0-0.07% |
| Ti | 0-0.05% |
| Al | Balance |
Table 2. Mechanical properties for aluminium alloy 1050 H14
| Property | Value |
| Proof Stress | 85 Min MPa |
| Tensile Strength | 105 - 145 MPa |
| Hardness Brinell | 34 HB |
| Elongation A | 12 Min % |
*properties above are for material in the H14 condition
Table 3. Physical properties for aluminium alloy 1050
| Property | Value |
| Density | 2.71 kg/m3 |
| Melting Point | 650°C |
| Modulus of Elasticity | 71 GPa |
| Electrical Resistivity | 0.282 x 10-6 Ω.m |
| Thermal Conductivity | 222 W/m.K |
| Thermal Expansion | 24 x 10-6/K |
When welding Aluminium alloy 1050 to itself or an alloy from the same subgroup the recommended filler wire is 1100. For welding to alloys 5083 and 5086 or alloys from the 7XXX series, the recommended wire is 5356. For other alloys use 4043 filler wire.
Table 4. Fabrication response for aluminium alloy 1050
| Process | Value |
| Workability - Cold | Excellent |
| Machinability | Poor |
| Weldability - Gas | Excellent |
| Weldability - Arc | Excellent |
| Weldability - Resistance | Excellent |
| Brazability | Excellent |
| Solderability | Excellent |
Q1: Do you accept the trial order ?
A1: Yes,if we have the exactly size in stock.we can delivery even 1 piece/meter .
Q2: Can I have free sample before making orders?
){kind=link}