Lork Manufacture Uns N06075/En 2.4630 Nickel Alloy Tube for Nuclear Engineering Haynes 75 Super Alloy Pipe

Product Details
Customization: Available
Product Type: Tube/Pipe
Material: Nife
Manufacturer/Factory, Group Corporation
Diamond Member Since 2024

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

  • Lork Manufacture Uns N06075/En 2.4630 Nickel Alloy Tube for Nuclear Engineering Haynes 75 Super Alloy Pipe
  • Lork Manufacture Uns N06075/En 2.4630 Nickel Alloy Tube for Nuclear Engineering Haynes 75 Super Alloy Pipe
  • Lork Manufacture Uns N06075/En 2.4630 Nickel Alloy Tube for Nuclear Engineering Haynes 75 Super Alloy Pipe
  • Lork Manufacture Uns N06075/En 2.4630 Nickel Alloy Tube for Nuclear Engineering Haynes 75 Super Alloy Pipe
  • Lork Manufacture Uns N06075/En 2.4630 Nickel Alloy Tube for Nuclear Engineering Haynes 75 Super Alloy Pipe
  • Lork Manufacture Uns N06075/En 2.4630 Nickel Alloy Tube for Nuclear Engineering Haynes 75 Super Alloy Pipe
Find Similar Products
  • Overview
  • Product Description
  • Detection
  • Processing
  • Packaging & Shipping
  • Company Profile
  • FAQ
Overview

Basic Info.

Carbon Content
Low Carbon
PCD
112mm
ET
42mm
Hole
5
Key Words
Haynes 75 Pipe/Tube
Thickness
3mm - 100mm
Outside Diameter
6mm - 1219mm
Length
as Your Requirments
Surface
Black, Bright, Polished, Pickling
MOQ
100kgs
Sample
Free-Sample
Technique
Cold Rolled, Hot Rolled
Condition
Annealed;Heat Treatment;
Stock
in Stock
Transport Package
Wooden Package
Specification
haynes 75
Trademark
LORK
Origin
China
HS Code
7505120000
Production Capacity
50000kg/Month

Product Description

Product Description

 

Introduction

LORK is a super alloy manufacturer with 20 years of manufacturing experience.
 

HAYNES 75 alloy (UNS N06075) is a solution-strengthened nickel-chromium alloy with moderate strength to 1200°F (650°C). It is principally used in low stress elevated temperature application requiring reasonable oxidation resistance, and is approximately equivalent to alloy 600 in performance. Alloy 75 is used in a number of fabricated part applications in the gas turbine and aerospace industries in Europe, and is also employed in general industrial heating uses. The alloy is readily formed and fabricated using conventional techniques. Haynes 75 Application
▪ Aerospace sheet metal fabrication
▪ Gas turbine engine components
▪ Industrial furnace components
▪ Heat-treating equipments and fixtures
▪ Nuclear engineering


Haynes 75 Specifications

UNS Number N06075
Werkstoff Number 2.4951, 2.4630
Standards  ASTM B637, RRMS 33030/1 (MSRR 7004), 7022, 7063, 7070, 7162, 7193, 7952, BS:HR 203, 3HR1, HR3, HR4, BS4HR 601

Haynes 75 Chemical Composition

 
Nickel 76 Balance
Cobalt 1 max.
Chromium 20
Iron 5 max
Titanium 0.4
Manganese 1 max.
Silicon 1 max.
Aluminum 0.4 max.
Titanium 0.4
Carbon 0.11
Haynes 75 Physical Properties
 
Physical Property British Units Metric Units
Density RT 0.302 lb/in3 RT 8.37 g/cm3
Melting Range 2445-2515°F - 1340-1380°C -
Electrical Resistivity 400°F 44.1 µohm-in 200°C 112µohm-cm
  800°F 46.0 µohm-in 400°C 117 µohm-cm
  1000°F 45.5 µohm-in 600°C 115 µohm-cm
  1200°F 45.3 µohm-in 700°C 115 µohm-cm
  1400°F 45.3 µohm-in 800°C 115 µohm-cm
  1600°F 45.3 µohm-in 900°C 115 µohm-cm
  1800°F 45.6 µohm-in 1000°C 116 µohm-cm
Thermal Conductivity 800°F 133 Btu-in/ft2-hr-°F 400°C 18.6 W/m-°C
  1000°F 149 Btu-in/ft2-hr-°F 600°C 22.7 W/m-°C
  1200°F 164 Btu-in/ft2-hr-°F 700°C 24.7 W/m-°C
  1400°F 179 Btu-in/ft2-hr-°F 800°C 26.5 W/m-°C
  1600°F 193 Btu-in/ft2-hr-°F 900°C 28.4 W/m-°C
  1800°F 207 Btu-in/ft2-hr-°F 1000°C 30.1 W/m-°C
Mean Coefficientof Thermal Expansion 70-800°F 7.9 µin/in -°F 20-500°C 14.3 µm/m-°C
  70-1000°F 8.2 µin/in -°F 20-600°C 15.0 µm/m-°C
  70-1200°F 8.5 µin/in -°F 20-700°C 15.4 µm/m-°C
  70-1400°F 8.9 µin/in -°F 20-800°C 16.5 µm/m-°C
  70-1600°F 9.4 µin/in -°F 20-900°C 17.1 µm/m-°C
  70-1800°F 10.3 µin/in -°F 20-1000°C 18.2 µm/m-°C
Dynamic Modulusof Elasticity 70°F 32.0 x 106 psi 20°C 221 GPa
  400°F 30.5 x 106 psi 200°C 210 GPa
  800°F 28.2 x 106 psi 400°C 197 GPa
  1000°F 27.0 x 106 psi 600°C 181 GPa
  1200°F 25.5 x 106 psi 700°C 173 GPa
  1400°F 24.6 x 106 psi 800°C 165 GPa
  1600°F 22.6 x 106 psi 900°C 153 GPa
  1800°F 20.5 x 106 psi 1000°C 140 GPa

Haynes 75 Tensile Properties, Sheet 1925°F (1050°C)/Bright Anneal

Form TestTemperature 0.2% OffsetYield Strength UltimateTensile Strength Elongation
Bar/Sheet °F °C ksi MPa ksi MPa %
RT RT 59.4 407 114.4 792 31
1000 538 51.9 363 105.6 726 27
1200 649 40.0 275 69.3 473 32
1400 760 22.0 152 41.4 286 75
1600 871 9.9 68 20.2 139 90
1800 982 4.4 31 9.7 66 91

Available Sizes And Specifications

Haynes75 available sizes and specifications
Grade Haynes75
Nickel plate Thickness: 0.3mm - 150.0mmWidth: 1000mm - 3000mm
Nickel strip/ nickel foil Thickness: 0.02mm - 16.0mm
Width: 5mm - 3000mm
Nickel coil Thickness: 0.3mm - 16.0mm
Width: 1000mm - 3000mm
Nickel pipe Outside diameter: 6mm - 1219mm
Thickness: 0.5mm - 100mm
Nickel Capillary Pipe Outside diameter: 0.5mm - 6.0mm
Thickness: 0.05mm - 2.0mm
Nickel bar Diameter: Ф4mm - Ф600mm
Nickel wire rod Diameter:Ф0.01mm - Ф6mm

Detection


Lork Manufacture Uns N06075/En 2.4630 Nickel Alloy Tube for Nuclear Engineering Haynes 75 Super Alloy Pipe

Processing

Lork Manufacture Uns N06075/En 2.4630 Nickel Alloy Tube for Nuclear Engineering Haynes 75 Super Alloy Pipe
 

Packaging & Shipping


Lork Manufacture Uns N06075/En 2.4630 Nickel Alloy Tube for Nuclear Engineering Haynes 75 Super Alloy Pipe
Lork Manufacture Uns N06075/En 2.4630 Nickel Alloy Tube for Nuclear Engineering Haynes 75 Super Alloy Pipe

Company Profile


Lork Manufacture Uns N06075/En 2.4630 Nickel Alloy Tube for Nuclear Engineering Haynes 75 Super Alloy Pipe

FAQ


Q1: Do you accept the trial order ?
A1: Yes,if we have the exactly size in stock.we can delivery even 1 piece/meter .

Q2: Can I have free sample before making orders?

A2: Yes,we can supply free sample as requirement,but buyer needs to pay the freight charges ,the freight fee will return to buyer after making order.

Q3: How do you control the quality ?
A3: MTC and PMI will be sent before shipment,any 3rd party inspection if need .

Q4: How about your delivery time ?
A4: Generally delivery time is 15 working days .

Q5: How can I quickly get the price list ?
A5: Directly click "chat now" or send us email with detail specifications,you will get the official price list in 1 hour .

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier